GPi-Case

Handheld Controller for Switch

V1038: 1. Fix the bug that sometimes it cannot be recognized after waking up.

GPi Case 2W

Step 1: Display Patch

Why do we need to install display GPi CASE 2W patch for Retropie and Recalbox?
Because Retropie and Recalbox systems default display output is HDMI. GPi CASE 2W has to transfer display output to GPIO for it to work correctly.

Step 2: Safe Shutdown

GPi CASE 2W can have SAFE SHUTDOWN functions. (Scripts are necessary).
* Safe shutdown scripts: https://github.com/RetroFlag/retroflag-picase

GPi-Case

GPi CASE 2

Why do we need to install display GPi CASE 2 patch for Retropie and Recalbox?
Because Retropie and Recalbox systems default display output is HDMI. GPi CASE 2 has to transfer display output to GPIO for it to work correctly.

shutdown

Safe Shutdown for GPi CASE 2

GPi CASE 2 can have SAFE SHUTDOWN functions.
(Scripts are necessary).  
 

  • All versions support.
  • CM4 Lite with WiFi version is recommended,
  • Because the EMMC version needs to write the system to the onboard EMMC, the steps are more complex,
  • In the without WiFi version, if you need to connect to the network, you need to use a USB wired network card, which will increase steps and costs (such as transferring ROM and installing safe shutdown script).
  • After testing, the following systems can be used at present
  • 1. recalbox(7.1.1)/(8.0.0)
  • 2. retropie(4.7.1)
  • 3. batocera31
  • GPiCase 2 has a built-in 4000 MAH polymer lithium battery
  • 1. Service life: according to the power of raspberry pi CM4, it can be used continuously for 5 ~ 6 hours without overclocking CPU (considering heat dissipation, overclocking is not recommended).
  • 2. Use a 5V 3A charger. The charging time is 2H. Charge to 80%. Then reduce the charging current. It takes about 3.5H to fully charge.
  • Firstly, the screen switching of gpicase2 does not support hot plug. In addition, it only supports the base conversion HDMI signal output.
  • 1. Install GPiCase 2 display patch
  • 2. Method 1 manually replace the (config. txt) file in the SD card /boot directory with the (config_lcd. txt/config_hdmi. txt ) file.
  • 3. Method 2 install the safe shutdown script. The script has the function of detecting whether it is inserted into the base, and can automatically switch between HDMI and LCD output (it needs to be powered on or restarted after connecting or unplugging the dock, and hot plug is not supported).
GPi-Case

GPi CASE

Why do we need to install display GPi CASE patch for Retropie and Recalbox?
Because Retropie and Recalbox systems default display output is HDMI. GPi CASE has to transfer display output to GPIO for it to work correctly.

shutdown

Safe Shutdown and Safe Reset

GPi CASE can have SAFE SHUTDOWN and SAFE RESET functions.
(Script is necessary).
 

  • 1. Use a sdcard reader insert microsd card into a windows system.
  • 2. Add a new file "wpa_supplicant.conf" microsd card root directory.
  • 3. Copy the content list below, and edit with notepad, change to your own "wifi_id" and "wifi_password".
  • country=CN
  • ctrl_interface=DIR=/var/run/
    wpa_supplicantGROUP=netdev
  • update_config=1
  • network={
  • ssid="wifi_id"
  • psk="wifi_password"
  • key_mgmt=WPA-PSK
  • priority=1
  • }
  • 4. You GPi Case with Pi Zero(w) can connect to your wifi at next boot up.
  • 1. Make sure GPi Case power on and wifi connected.
  • 2. Run putty.exe or download putty.exe from http://www.putty.org/ by yourself.
  • 3. Input Host Name (or IP address), such as: 192.168.1.88, click Open to connect GPi Case.
  • 4. login in
        for Retropie
        user: pi
        password: raspberry
  • 5. sudo raspi-config
        At the menu:
        choose: 4 Localisation Options-->I2 Change Timezone-->None of the above-->GMT+8-->Ok-->Finish
        reboot system, boot times will be faster.
  • 1. The short usb cable in the cartridge connection issue, please assemble the short usb cable again.
  • 1. GPIO connector in the cartridge assembled not well, please double check and assemble it again.
  • 1. GPIO connector in the cartridge assembled not well, please double check and assemble it again.

System made for the GPi Case

display patch, input mapping and safe shutdown are automatically taken care of.

Recalbox 6.1 for GPi

Lakka.tv

Batocera-linux

Supreme Retro Gaming

LibreELEC